Honeywell Vocollect Hardware Reference Manual Download Page 273

Page: 273 / 316

| Troubleshooting Equipment Problems |

273

Error Message

Solution
3.

Reload the task.

Reboot the device.

Reload VoiceClient.

"Task load failed."

Go to an area of known good coverage.

Turn the device off and then turn it back on again.

Reload the task.

Reboot the device.

Reload VoiceClient.

"Task not loaded. No task name available."

Reload the task.

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Telnet client process failed to start."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Telnet session manager failed to start."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Telnet VT220 emulation process failed to start."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Unable to receive input data."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Unable to retrieve operator files."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Unable to send output data."

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Unable to train words. Not enough free flash memory."

Wait for the device to go to sleep.

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

"Warning, low flash memory!"

Go to an area of known good coverage.

Turn the device off and then turn it back on again.

Reboot the device.

Reload VoiceClient.

Place the device in a charger as soon as possible.

Summary of Contents for Vocollect





























































































































































































































































































































Search results

Summary of Contents for Vocollect

Reviews:

Related manuals for Vocollect

Brands by name

Popular brands

Honeywell Vocollect, Hardware Reference Manual

Search results

Summary of Contents for Vocollect

Reviews:

Related manuals for Vocollect

Brands by name

Popular brands