Rev. D
60
KDMU000799
02/6/04
7.5
PROGRAMMING PRIVACY ZONES, CONTINUED
7.5.2
Editing Privacy Zones
To edit privacy zones, perform the procedures for programming a privacy zone.
To save the privacy zone title only without changing the coordinates, perform steps
1-5, then press
N
to save the new title.
7.5.3 Deleting
Privacy
Zones
1. Press
SHIFT + F8
.
2. Press
P
for privacy zone.
3. Type
the
password
and press
Enter
.
4. Type
the
privacy zone number (0-9)
and press
Enter
.
5. Press
D
to delete the privacy zone.
7.5.4
Changing the Privacy Zone Password
1. Press
SHIFT + F8
.
2. Press
P
for privacy zone.
3. Type
the
current password
and press
Enter
.
(The factory set password is blank. Press enter to submit a blank password.)
4. Press P to program the password.
5. Type the new password (up to 14 alphanumeric characters) and press Enter.
6.
Re-enter the new password
for verification and press
Enter
. If you enter a
different password the second time, an invalid message is displayed and you
must start again.
7. After programming the password, you can program a privacy zone or press Esc
twice to exit
