Rev. D
56
KDMU000799
02/6/04
7.3
PROGRAMMING VECTORSCANS, CONTINUED
5. Enter the velocity from
1 to 400 (degrees per second)
in the VELOCITY column
of the
0 row
.
6. Type the dwell time from 0-99 seconds.
7. Continue entering PreShots, up to 64, by repeating steps 4 through 6.
PreShots will be performed in the order listed. To rearrange the order of the
PreShots, use the gray up, down, left, and right arrow keys to move the cursor to
any field in the display. The gray
Insert
key inserts a line above the cursor.
The gray
Delete
key deletes the line the cursor is on.
8. Press
Enter
when finished programming PreShots in the VectorScan.
a. Press
E
to edit the VectorScan title and/or the contents before saving.
b. Press
S
to save the VectorScan title and programmed PreShots.
c. Press
D
to delete the VectorScan.
9. Repeat steps 2-8 to program another VectorScan or press
ESC
to end
programming.
7.3.1 Editing
VectorScans
1. Press
SHIFT + F6
2. Type
the
VectorScan number
and press
Enter
.
3. Edit
the
PreShot
fields as needed. (Refer to
Section 7.3, step 7
.)
4. Press
S
to save the edits.
5. Press
ESC
to exit programming.
7.3.2 Deleting
VectorScans
1. Press
SHIFT + F6
.
2. Type
the
VectorScan
number
and press
Enter
.
3. Press
Enter
to accept the VectorScan title.
4. Press
Enter
to access commands.
5. Press
D
to delete the VectorScan.
6. Press
ESC
to exit programming.
