Rev. D
32
KDMU000799
02/6/04
5.4 DIAGNOSTIC
OPTIONS
Select
4
from the MAIN MENU to access
Diagnostic Options. Diagnostic menus
are designed for assisting service
technicians in troubleshooting.
Refer to the controller user’s manual for
operation of the controller to perform
these functions.
5.4.1 Coordinates
Select
1
to turn the Pan and Tilt
Coordinates display ON or OFF.
When you exit programming, the
coordinates are displayed. The pan and
tilt coordinates are displayed in degrees.
5.4.2 Error
Table
The error table lists the 64 bytes (two digit
hexadecimal number) that have been
entered into the error table. Some errors
are represented by single bytes (2 digits)
and some are represented by 2 bytes (4
digits). Not all entries are actual errors -
some are indications of such things as
normal power down and power up
operations. (The codes used in the error
table can be seen by selecting option 5 -
Display Error Tbl. Codes.)
Select
2
to turn the Error Table Display
ON or OFF.
DIAGNOSTIC OPTIONS
1 Coordinates ................................. OFF
2 Error Table................................... OFF
3 Clear the Memory
4 Clear the Error Table
5 Display Error Tbl. Codes
6 Restore Default Settings
7 Reset Scan and Camera
8 Upload new firmware to KD6
ESC to Exit
DIAGNOSTIC OPTIONS
1 Coordinates ................................. OFF
2 Error Table................................... OFF
3 Clear the Memory
4 Clear the Error Table
5 Display Error Tbl. Codes
6 Restore Default Settings
7 Reset Scan and Camera
8 Upload new firmware to KD6
ESC to Exit
Pan = xxx.x........................Tilt=xxx.x
---- UltraDome KD6i ----
519543-1980
1 Language ............................. English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
