manualshive.com logo in svg

Honeywell Thor CV41, User Manual, Page: 5 / 118

Share
Download
Honeywell Thor CV41 User Manual Download Page 5

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

v

Chapter 5 - Configure the Computer.........................................................................35

How to Configure the Computer ...............................................................................................................36

Use Intermec Settings on the Computer ...............................................................................................36

Start Intermec Settings ..........................................................................................................................36

About the Structure of Intermec Settings .......................................................................................37

Navigate in Intermec Settings .............................................................................................................40

Restore Default Settings ........................................................................................................................41

Hide Menu Items in Intermec Settings ............................................................................................42

Use Intermec Settings Remotely With SmartSystems Foundation ............................................42

About Network Communications..............................................................................................................42

Configure 802.11a/b/g/n (Wi-Fi) Radio Communications.....................................................43

About Bluetooth Communications ....................................................................................................43

Connect to a Bluetooth Scanner ..................................................................................................43

Connect to a Bluetooth Printer .....................................................................................................44

About Serial and USB Communications..........................................................................................45

Connect the Honeywell SR30 or SR61T USB Scanner........................................................45

Connect to a Serially Tethered Scanner ....................................................................................46

About Wireless Security ................................................................................................................................47

Choose Between Microsoft and Wireless Security ......................................................................47

Select Microsoft Security as Your Security Choice ...............................................................48

Select Wireless Security as Your Security Choice..................................................................51

Select a Wireless Security Profile.................................................................................................51

Load a Certificate .....................................................................................................................................55

Chapter 6 - Use WWAN and GPS Communications ................................................57

About WWAN Communications.................................................................................................................58

About the Status Buttons and Icons .................................................................................................58

Activate UMTS Communications .......................................................................................................59

Activate CDMA Communications .......................................................................................................60

About GPS ..........................................................................................................................................................60

Test the GPS Receiver .............................................................................................................................61

Configure WWAN Settings...........................................................................................................................61

Create a Profile ..........................................................................................................................................61

About the OneClick Internet PIN Number ......................................................................................62

Summary of Contents for Thor CV41























































































































Reviews:

No comments