manualshive.com logo in svg

Honeywell Thor CV41, User Manual, Page: 72 / 118

Share
Download
Honeywell Thor CV41 User Manual Download Page 72

64

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

1. Tap 

Start

 > 

All Programs

 > 

OneClick Internet 

 > 

OneClick Internet

. The Oneclick 

Internet application opens.

2. Tap the 

Settings

 button and select the 

General

 tab.

3. Select the 

Allow Roaming 

checkbox to enable roaming and clear it to disable 

roaming.

Enable Roaming Alerts

If you have enabled roaming, the computer can notify you when you are not in your car-
rier’s network by sending you an alert telling you that you are roaming.

1. Tap 

Start

 > 

All Programs

 > 

OneClick Internet 

 > 

OneClick Internet

. The Oneclick 

Internet application opens.

2. Tap the 

Settings

 button and select the 

General

 tab.

3. Select the 

Roaming Alert 

checkbox to enable alerts and clear it to disable alerts.

View WWAN Network Statistics

View WWAN network statistics to know how much data you have sent and received, the 
WWAN network speed, and the duration of your current connection.

View All Current Network Statistics

Use this section to learn how to view all of your current network statistics.

1. Tap 

Start

 > 

All Programs

 > 

OneClick Internet 

 > 

OneClick Internet

. The Oneclick 

Internet application opens.

2. Tap the 

Statistics

 button. The WWAN Network Statistics screen opens and displays 

the statistics of your current connection.

View Used Data History

Use this section to learn how much data has been transferred within a specific time-
frame.

1. Tap 

Start

 > 

All Programs

 > 

OneClick Internet 

 > 

OneClick Internet

. The Oneclick 

Internet application opens.

2. Tap the 

Settings

 button and select the 

History

 tab. The WWAN Network Statistics 

screen opens and displays the statistics of your current connection.

3. Choose the dates you want to view your data history from the drop-down menus. 

The total data used is displayed.

4. (Optional) Tap 

Reset

 to reset your used data history.

Summary of Contents for Thor CV41























































































































Reviews:

No comments