Honeywell Thor CV41, User Manual, Page: 58 / 118

50 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
6. For
Network Authentication
, choose
Open
or
Shared
. The Encryption type
automatically defaults to WEP .
7. For
Network Key
, enter the pre-shared key or the passphrase.
8. For Confirm Network Key , enter the pre-shared key or the passphrase again.
9. Select
Enable IEEE 802.1x Authentication for this network
.
10. In EAP type , choose either PEAP or Smart Card or other certificate .
11. Tap the
Properties
button.
12. Select Validate server certificate .
13. Select a root certificate or load a root certificate of the authentication server on your
computer. For help, see Load a Certificate .
14. Tap
OK
to exit the Properties screen
15. Tap OK again to save the Microsoft Security settings.
Configure Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with Microsoft security.
Honeywell recommends that you use WPA2-PSK instead of WEP if possible.
1. Make sure the communications and radio parameters on your computer are config-
ured.
2. Tap Start > Network Connections . The Network Connections screen appears.
3. Tap and hold onto the
Wireless Network Connection
icon until the pop-up screen
appears and select Properties .
4. Tap the
Wireless Networks
tab.
5. Make sure your wireless network you are configuring is selected and tap the
Properties
button.
6. For Network Authentication , choose Open .
7. For
Data Encryption
, choose
WEP
.
8. For Network Key , enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
9. For
Confirm Network Key
, enter the the ASCII or hex key again.
10. For Network Key Index , select the key you want to use for data transmission or
select
The key is provided for me automatically
.
11. Save your settings.
Use Open (No Security) Associations With Microsoft Security
Use the following procedure to configure your computer for open security using Micro-
soft WZC.