manualshive.com logo in svg

Honeywell Thor CV41, User Manual, Page: 51 / 118

Share
Download
Honeywell Thor CV41 User Manual Download Page 51

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

43

Configure 802.11a/b/g/n (Wi-Fi) Radio Communications

The computer contains an 802.11 radio to transfer data using wireless communications 
and to support the TCP/IP network protocols. This section of the manual assumes that 
your wireless network is set up, including your access points.

By default, the 802.11 radio is enabled. If it is disabled, use the following procedure to 
enable the Wi-Fi radio using Intermec Settings.

1. From the Intermec Settings main menu, tap 

Communications

 > 

802.11 Radio

 > 

Radio Enabled

.

2. Select the 

Radio Enabled

 check box and tap 

OK

. By default, the computer uses 

Wireless security and enables DHCP.

3. Use Intermec Settings to configure any other parameters you need to use for 

communication with your network.

4. Configure 802.11 security. For help, see 

About Wireless Security

.

About Bluetooth Communications

Your computer is Bluetooth™-enabled out-of-the-box. With Bluetooth, you can connect 
to other Bluetooth devices, such as scanners or printers. 

Connect to a Bluetooth Scanner

You can connect the computer to a Honeywell Bluetooth scanner, such as the SF51 or 
SR61. 

Make sure all components with antennas are at least 30 cm (1 ft) 
apart when power is applied. Failure to comply could result in 
equipment damage.

Summary of Contents for Thor CV41























































































































Reviews:

No comments