manualshive.com logo in svg

Honeywell Thor CV41, User Manual, Page: 4 / 118

Share
Download
Honeywell Thor CV41 User Manual Download Page 4

iv

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

Set the Screen Backlight........................................................................................................................17

Rotate the Screen .....................................................................................................................................17

Enable the Defroster................................................................................................................................18

Change the Volume ........................................................................................................................................18

About the CV41 Radio Antennas...............................................................................................................18

Connect an External Antenna..............................................................................................................18

About the Keypad ............................................................................................................................................20

Remap the Power Button.......................................................................................................................20

Enter Characters on the Keypad .........................................................................................................21

CV41 Options and Accessories..................................................................................................................21

Chapter 3 - Understand the User Interface and Applications..............................23

About the User Interface ..............................................................................................................................24

About the Desktop Screen.....................................................................................................................24

About Screen Gestures ...........................................................................................................................24

Use Pop-Up Menus ..................................................................................................................................25

Set the Date and Time ...................................................................................................................................25

About Applications..........................................................................................................................................25

Applications Available On the Computer ........................................................................................25

Applications You Can Download For the Computer....................................................................26

About Intermec Launcher ...............................................................................................................26

About Features Demo.......................................................................................................................27

About SmartSystems ........................................................................................................................27

Chapter 4 - Manage the Computer ............................................................................29

About Managing the Computer in Your Network ...............................................................................30

Manage the Computer Using SmartSystems Foundation.......................................................30

Install Applications Onto the Computer ................................................................................................30

Install Applications Using SmartSystems Foundation Console ............................................31

Install Applications Using an SD Card .............................................................................................31

Install Applications Using a USB Storage Device ........................................................................31

Update the System Software ......................................................................................................................31

Update System Software Using SmartSystems Foundation...................................................32

Update Individual Computers Using a USB Storage Device ...................................................32

Summary of Contents for Thor CV41























































































































Reviews:

No comments