Honeywell Thor CV41, User Manual, Page: 68 / 118

60 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Activate CDMA Communications
To activate the CDMA radio module in your computer, you need to contact your wireless
carrier and set up an account for each computer. The following table lists the carriers
that Honeywell currently supports. If your carrier is not listed in the table, please con-
tact Honeywell product support to see if it is now supported.
The carrier will require the International Mobile Equipment Identity number (IMEI) to
start the activation process. You can find the IMEI number in the OneClick Internet
application, tap
Settings
and the
Info
tab.
After you supply the IMEI number to your carrier, they will respond with values that you
must enter in the OneClick (if required). Your carrier sales contact and an Honeywell
representative can guide you through the process.
1. Press the Power button. The computer turns off.
2. Connect an external WWAN antenna. For more information, see Connect an External
Antenna .
3. Press the
Power
button again to turn on the computer.
4. Select Start > All Programs > OneClick Internet > OneClick Internet . The Oneclick
Internet application opens.
5. Tap Settings and select the General tab.
6. Select
Automated Activation
and tap
Next
.
7. Enter *22899 in the text field and tap Next . CDMA communications is activated.
8. Verify your settings by tapping
Settings
in the OneClick Internet application and
selecting the Network tab.
About GPS
The GPS receiver in the computer can deliver standards-based National Marine Elec-
tronics Association (NMEA) data strings to GPS applications. To use the GPS receiver,
you need to:
• enable WWAN communications.
• install an external GPS antenna to the CV41. For more information, see Connect an
External Antenna .
For more information on purchasing an external GPS antenna, contact your local Hon-
eywell representative.
Currently Supported Carriers
Country Carriers
United States Verizon