Rev. B
6-40
HMXMC001013
31-Mar-06
6.12 DEFINING AUXILIARY CONTROL OUTPUT
Selection of the
Auxiliary Control Outputs
tab allows for direct editing of all the
properties for each control output. The details of each of the properties are described
below.
Figure 6.10: Auxiliary Control Output Tab
Auxiliary Control Outputs
Control Output
Number
The Control Output Number is purely a reference number used to
distinguish one control output from another. The control output number field
is NOT a changeable field.
Description
This is an 18-character description used to identify the control output. It is
not used by MAXPRO-Net at all and it is purely for operator reference.
Enter up to an 18-character description and press Enter on the keyboard.
Subrack ID
Specifies the subrack ID number where the control output module resides.
The valid range is 1 – 99. If a high level or mimic panel output is being used,
the number is prefixed with an “H”. If a keyboard output is being used the
number is prefixed with a “K”.
Enter the subrack ID number and press Enter on the keyboard.
For VideoBlox Subrack
, this represents the ‘V’+communication port
number to which the VideoBlox alarm concentrator AVBPIT is connected.
Valid range: ‘V’+maximum communication ports.
