manualshive.com logo in svg

Honeywell MAXPRO-Net, Commissioning Manual

The Honeywell MAXPRO-Net product is a cutting-edge security software system designed for efficient and reliable surveillance. Ensure smooth hardware installation with our comprehensive Hardware Installation Manual, available for free download from our website. Unlock the full potential of your security system today.

Share
Download
background image

Rev. B 

3-18 

HMXMC001013 

  

31-Mar-06 

3.7 NETWORKING 

AND 

TRUNKING, CONTINUED 

The Special parameters section of the SETMAX editor contains a field for setting the 
STEAL CRITERIA for trunk congestion management (refer to Chapter: 6).  There are 

three modes of congestion management available. 

• 

Priority-level.  Uses each operator's individual priority level to determine who 
STEALS from whom.  This is the default setting. 

• 

On-alarm-only.  Will only STEAL a trunk line to facilitate an alarm activated video 
selection.  Operators cannot steal from one another. 

• 

Never-STEAL.  Will never steal a trunk line for any reason.  First in first serve 

allocation of trunk lines, regardless of operator priorities. 

 

The system uses on-screen messages to inform operators of trunk allocation and 
congestion situations.  If a trunk line is not available to service an alarm activated video 
selection, then an error message is written into the error log file. 

 

Note:

  Additional trunk lines could be added to a system 

to decrease the occurrence of congestion. 

3.8 CONTROLLING 

EQUIPMENT 

The MAXPRO-Net video system supports a fully integrated environment where all 
cameras, VCRs and other video equipment can be controlled from a keyboard. When 
control keys (or joystick) are activated on the keyboard, the video system must first 
determine: 

• 

What is the currently selected monitor? 

• 

What camera (or VCR playback) is currently on display? 

• 

What site receiver and I/O module equipment has been assigned to that camera (or 
VCR, etc.)? 

Then the system sends the required data command to control that specific camera (or 
VCR, etc.) 

The operator does

 not 

have to be concerned with the numerous interconnections 

between various equipments in the system.  What you see is just what you get (and 
control). 

A fully automated 

control

 of cameras, VCRs and other equipment can also be 

performed in response to alarms. 

3.8.1 PTZ 

Cameras 

When cameras are to be motorized (PTZ) the associated control module located in the 
I/O subrack must be allocated.  Camera control specifications are made in the video 
input table of SETMAX, the configuration editor program.  (Refer to section 6.2). 

Summary of Contents for MAXPRO-Net













































































































































































































Reviews:

No comments

Related manuals for MAXPRO-Net

IBM N Series Setup And Configuration Manual preview
N Series
Brand: IBM Pages: 44
Cabletron Systems SmartSwitch 9A100 Installation And Setup Manual preview
SmartSwitch 9A100
Brand: Cabletron Systems Pages: 52
Cabletron Systems SmartSwitch 9W006 Quick Start Manual preview
SmartSwitch 9W006
Brand: Cabletron Systems Pages: 34
Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual preview
SmartSTACK ELS100-S24TX2M
Brand: Cabletron Systems Pages: 102
Cabletron Systems 9A426-01 Appendix preview
9A426-01
Brand: Cabletron Systems Pages: 24
Cabletron Systems SmartSwitch 9000 Appendix preview
SmartSwitch 9000
Brand: Cabletron Systems Pages: 14
Cabletron Systems MicroMMAC 22ES Reference Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 38
Radial Engineering Gold Digger User Manual preview
Gold Digger
Brand: Radial Engineering Pages: 8
Radial Engineering BigShot ABY User Manual preview
BigShot ABY
Brand: Radial Engineering Pages: 2
Rack World CAT5 Quick Setting Manual preview
CAT5
Brand: Rack World Pages: 4
Sams DS-4 User Manual For Use And Maintenance preview
DS-4
Brand: Sams Pages: 10
Cablematic HUB-1230i User Manual preview
HUB-1230i
Brand: Cablematic Pages: 8
Open Mesh S8-L Quick Start Up Manual preview
S8-L
Brand: Open Mesh Pages: 2
Grizzly H8239 Instructions preview
H8239
Brand: Grizzly Pages: 2
Datavideo SE-2200 Instruction Manual preview
SE-2200
Brand: Datavideo Pages: 38
Ribimex 124216 User And Maintenance Manual preview
124216
Brand: Ribimex Pages: 15
Zamel GRG-01 Quick Start Manual preview
GRG-01
Brand: Zamel Pages: 2
Key Digital KD-PS42 Manual preview
KD-PS42
Brand: Key Digital Pages: 31

Brands by name

Popular brands

Load more brands