Honeywell HX3, User Manual, Page: 215 / 230

12 - 7
Interpreting the Charging Pocket LEDs
The status of the charge operation is indicated by the color of the LED for each charging pocket.
RED Continuous - on any charge pocket
Continuous red means the battery pack is charging.
• RED FLASHING - on any charge pocket
• Battery pack fault or failure.
• Battery analyzer timeout period expired.
RED FLASHING - on all charge pockets
Battery charger fault or failure.
• Battery analyzer fault or failure.
• Battery pack fault or failure or a battery charger timeout period expiration.
• GREEN - on any charge pocket
• Continuous green means the battery pack charge is complete - Battery is Ready.
YELLOW - on any charge pocket
Continuous yellow / amber means the battery pack temperature is out of range. The charging pocket is in standby mode
while the pocket waits for the battery pack to warm up or cool down.
• NO LIGHT - on any charge pocket
• No light on a charge pocket means there is no battery pack installed
• or the battery pack in the pocket is not fully inserted
• or a defective or damaged battery pack is installed
• or the charger is defective or damaged.
• NO LIGHT - on all charge pockets
• No light means there is no AC power available to the battery charger or there is power but there are no batteries in any
charging bay.