Honeywell HX3, User Manual, Page: 160 / 230

9 - 8
The options for the Radio Mode parameter should be set, based on the antenna configuration, as follows:
Contact Customer Support (page 14-1) if you have questions about the antenna(s) installed in your HX3.
Radio Mode BG Radio:
BG Rates Full
or
A Radio:
BGA Rates Full Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the
AP. The options displayed for this parameter depend on the type of radio
(802.11b/g or 802.11a/b/g) installed in the mobile device.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates preferred)
BGA Rates Full (All B and G rates and all A rates with B and G rates
preferred)
Ad Hoc (when connecting to another client device instead of an AP)
Default:
BG Rates Full (for 802.11b/g radios)
BGA Rates Full (for 802.11a/b/g radio)
BG radio only – Previous SCU versions may have the default set as BG Rates
Full. Depending on the SCU version, either BG Optimized or BG subset is the
default.It is important the Radio Mode parameter correspond to the AP to
which the device is to connect. For example, if this parameter is set to G rates
only, the HX3 may only connect to APs set for G rates and not those set for B
and G rates.
Antenna Configuration Radio Mode
A Main and A Aux ABG Rates Full
BGA Rates Full
A Main and A Aux A Rates Only
BG Main and BG Aux B Rates Only
G Rates Only
BG Rates Full
BG Subset
Parameter Default Description