Honeywell HX3, User Manual, Page: 17 / 230

1 - 5
CE Mark
The CE marking indicates compliance with the following directives:
• 1995/5/EC R&TTE
• 2011/65/EU RoHS (Recast)
In addition, complies to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply. European contact::
Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE
marked and does not comply with the Low Voltage Directive.
RF Safety Notices
Bluetooth
Class II
Honeywell Scanning & Mobility Product Environmental Information
Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information.
Hand Held Products Europe BV
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
This device contains transmitter Module FCC ID: KDZLXE4830P.
Caution:
This portable device with its antenna complies with FCC and Industry Canada RF exposure limits set for an
uncontrolled environment. This equipment has shown compliance with FCC and Industry Canada Specific
Absorption Rate (SAR) limits. Highest reported SAR for the HX3 is 0.641W/kg on body. Any accessories not
provided by Honeywell should not be used with this device. This device must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device contains transmitter Module FCC ID: KDZLXE4831P.
Caution:
This portable device with its antenna complies with FCC and Industry Canada RF exposure limits set for an
uncontrolled environment. This equipment has shown compliance with FCC and Industry Canada Specific
Absorption Rate (SAR) limits. Highest reported SAR for the HX3 is 0.333W/kg on body. Any accessories not
provided by Honeywell should not be used with this device. This device must not be co-located or operating
in conjunction with any other antenna or transmitter.