Honeywell HX3 User Manual Download Page 188

Page: 188 / 230

9 - 36

6. Tap

Yes

to import the certificate.

7. Once the certificate is installed, return to the proper authentication section, earlier in this manual.

Generating a User Certificate

The easiest way to get the user certificate is to use a browser on a PC to navigate to the Certificate Authority.

To request the user certificate, open a browser to http://<CA IP address>/certsrv.

Sign into the CA with the username and password of the person who will be logging into the mobile device.

8. This process saves a user certificate and a separate private key file. Windows CE equipped devices such as the HX3

require the private key to be saved as a separate file rather than including the private key in the user certificate.

Summary of Contents for HX3







































































































































































































































Search results

Summary of Contents for HX3

Reviews:

Honeywell HX3, User Manual, Page: 188 / 230

Search results

Summary of Contents for HX3

Reviews: