manualshive.com logo in svg

Honeywell HX3, User Manual, Page: 101 / 230

Share
Download
Honeywell HX3 User Manual Download Page 101

6 - 9

Auto Reconnect

This option is Enabled (checked) by default.  This option controls the overall mobile Bluetooth device reconnect 
behavior.

When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automatically disabled and dimmed.

•

When Auto Reconnect is disabled (unchecked), no devices are reconnected in any situation.  The status of Auto 
Reconnect on Boot is ignored and no devices are reconnected on boot.  The status of Clear Pairing Table on 
Boot controls whether the pairing table is populated on boot.

•

When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled (unchecked), devices are 
not reconnected on boot, but are reconnected in other situations (example: return from out-of-range).

•

When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled (checked), devices are 
not reconnected on boot, but are reconnected in other situations (example: return from out-of-range).  The 
pairing table is cleared on boot.  The status of Auto Reconnect on Boot is ignored and the option is automatically 
disabled (unchecked) and dimmed.

OPP Setup Panel

Use this screen to setup the HX3 for Object Push Protocol (OPP).

Inbox

This is an alphanumeric field displaying the currently selected Inbox.

The Inbox is the location where files pushed to the HX3 from a remote client are stored.  Use the browse button ... to 
browse to and select the Inbox folder.

Use Windows Explorer to create a custom directory, if desired, before selecting the Inbox folder.

•

The default Inbox is \My Device\My Documents\DefaultInbox.

Outbox

This is an alphanumeric field displaying the currently selected Outbox.

The Outbox is the location where files are stored to be pushed from the HX3 to a remote server.  Use the browse but-
ton ... to browse to and select the Outbox folder.

Use WExplorer to create a custom directory, if desired, before selecting the Outbox folder.

•

The default Inbox is \My Device\My Documents\DefaultOutbox.

Write Capable

When checked, files may be written to the HX3.  When unchecked, inbound files are rejected.  This option is enabled 
(checked) by default.

Summary of Contents for HX3







































































































































































































































Reviews:

No comments