Honeywell HX3, User Manual, Page: 166 / 230

9 - 14
WAPI Off Default is Off and dimmed (cannot be changed).
TX Diversity BG: On
A: Main Only How to handle antenna diversity when transmitting packets to the Access
Point.
Options are:
Main only (use the main antenna only)
Aux only (use the auxiliary antenna only)
On (use diversity or both antennas).
The options for the TX Diversity parameter should be set, based on the
antenna configuration, as follows:
Antenna Configuration: A Main and BG Main. TX Diversity: Main only.
Antenna Configuration: A Main and A Aux. TX Diversity On.
Antenna Configuration: BG Main and BG Aux. TX Diversity: On.
Contact
Customer Support (page 14-1) if you have questions about the
antenna(s) installed in your HX3.
RX Diversity BG: On-Start
on Main
A: Main Only How to handle antenna diversity when receiving packets from the Access
Point.
Options are:
Main Only (use the main antenna only)
Aux Only (use the auxiliary antenna only)
On-start on Main (on startup, use the main antenna)
On-start on Aux (on startup, use the auxiliary antenna).
The options for the RX Diversity parameter should be set, based on the
antenna configuration, as follows:
Antenna Configuration: A Main and BG Main. RX Diversity: Main only.
Antenna Configuration: A Main and A Aux. RX Diversity On-start on Main.
Antenna Configuration: BG Main and BG Aux. RX Diversity: On-start on
Main.
Contact
Customer Support (page 14-1) if you have questions about the
antenna(s) installed in your HX3.
Frag Thresh 2346 If the packet size (in bytes) exceeds the specified number of bytes set in the
fragment threshold, the packet is fragmented (sent as several pieces instead
of as one block). Use a low setting in areas where communication is poor or
where there is a great deal of wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
RTS Thresh 2347 If the packet size exceeds the specified number of bytes set in the Request to
Send (RTS) threshold, an RTS is sent before sending the packet. A low RTS
threshold setting can be useful in areas where many client devices are
associating with the Access Point.
Options are: Any number between 0 and 2347.
LED Off The LED on the wireless card is not visible to the user when the wireless card
is installed in a sealed mobile device.
Options are: On, Off.
Tray Icon On Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
Hide Password On When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.
Admin Password SUMMIT (or
Blank) A string of up to 64 alphanumeric characters that must be entered when the
Admin Login button is tapped. If Hide Password is On, the password is
masked when typed in the Admin Password Entry dialog box. The password
is case sensitive. This value is masked when the Admin is logged out.
Options are: none.
Parameter Default Description