Honeywell HRSD40F, User Manual

Page: 95 / 168

Document 800-03097 Rev C 95
03/09
Configuration
Table 3-12 Text-In Setup Screen Options
Option Function
Virtual Port Highlight the field beside Virtual Port , press , then enter
the port number to use. You can choose from 1 to 4 . This field
is activated only when setting up the VP Filter device.
Transaction
Start Highlight the field beside Transaction Start , and press .
Use the virtual keyboard to enter the Transaction Start string.
Refer to the device manufacturer's documentation for the text
string that the device first sends when a transaction starts.
Any Character If you want the DVR to react to any character sent from the
text-in device, turn on
Any Character .
Highlight Any Character , and press to toggle between
On and Off .
Note If you choose this option, then you can not enter a
Transaction Start text string.
Note If Any Character is turned On , you can not enter any text in the Start String
field.
Transaction End Highlight the field beside Transaction End , and press .
Use the virtual keyboard that appears to enter the Transaction
End string.
Refer to the device manufacturer's documentation for the text
string that the device sends when a transaction ends.
X more line(s) Highlight the X more line(s) field and press . Select the
number of additional lines of text that you want the DVR to
record. You can choose from
0 to 10 .
Line Delimiter Highlight the field beside Line Delimiter , and press . Use
the virtual keyboard to enter the character(s) that the device
uses to indicate the end of a line.
Control characters can be created using ^ and a capital
letter. For example, you can use
^J for NL (New Line), and ^M
for CR (Carriage Return).
Refer to the device manufacturer's documentation for Line
Delimiter character(s).