Honeywell HRSD40F, User Manual

Page: 101 / 168

Document 800-03097 Rev C 101
03/09
Configuration
Figure 3-70 System Events Action Screen
2. Highlight the Alarm-Out field beside the desired event (Check Recording, Check
Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or Disk
S.M.A.R.T.), and press
. Select between Alarm Output connector and the
DVR's internal buzzer that you would like to activate and to sound whenever the
DVR detects event.
Note Alarm-Out action cannot be set to System and Panic Record
events.
3. Highlight the Notify field beside the desired event (System, Panic Record, Check
Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk
Temperature, or Disk S.M.A.R.T.), and press
.
a. Toggle the entire list On and Off by highlighting Notification and pressing
.
OR
Toggle the individual items
On and Off by highlighting that item and pressing
.
b. Highlight OK and press to accept your changes.
Note Mail notify is the only option available for the System event.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).