Honeywell HRSD40F, User Manual

Page: 64 / 168

64
HRSD40F DVR User Guide
Setting Up Mail Notification
1. Highlight Enable and press to toggle between On and Off . You can change
these settings only if Mail is enabled.
2. Highlight the box beside SMTP Server and press . A virtual keyboard
appears so you can enter the IP address or domain name of the SMTP server.
Note You will need to get the IP Address or domain name of the SMTP
Server from your network administrator.
Note You can use the domain name instead of IP address if you have
already set up the DNS Server when setting up the LAN.
3. Highlight the box beside Port and press . Use the arrow buttons to enter the
SMTP Server port number you obtained from your system administrator. The
default port number is
25
.
4. Highlight Use SSL/TLS and press to toggle between On and Off . When it is
On , the DVR can send an e-mail via an SMTP server requiring SSL (Secure
Sockets Layer) authentication.
5. Highlight the box beside Authentication and press . An Authentication
screen appears.
Figure 3-30 Authentication Screen
6. Highlight Use and press to toggle between On and Off . Highlight the field
beside User and Password and press . A virtual keyboard appears so you
can enter the user ID and password. Click OK when finished.
7. Highlight the field beside Sender and use the virtual keyboard to enter the
sender's e-mail address.
8. Highlight the field beside Recipient and use the virtual keyboard to enter the
recipient's e-mail address. Click OK when finished.