Honeywell HRSD40F, User Manual

Page: 128 / 168

128
HRSD40F DVR User Guide
1. Set your search conditions based on the options shown in Table 4-6 .
2. Select Search and press . The search results appear in the Motion Search
screen.
3. Select Cancel to exit the screen without saving the changes.
Note If you choose to search for motion events for another camera,
you will be asked whether or not you want to delete the previous
search results from the list.
Table 4-6 Motion Search Options
Option Function
From Either enable First (highlight the box and press ), which
means that the DVR begins the search at the first recorded image.
OR
Disable
First and then enter a specific time and date from which
the DVR begins the search.
To Either enable Last , which means that the DVR ends the search at
the last recorded image.
OR
Disable
Last and then enter a specific time and date at which the
DVR ends the search.
Type Highlight the box beside Type and press . Select between
Motion Search and Museum Search . Motion Search detects
motion in the defined area. Museum Search detects if a defined
object has moved.
Zone Highlight the box beside Zone and press . An image from the
video appears with a grid overlaid. You can turn sensor blocks On
and Off to define the area of the picture in which you want to
search for motion.
The zone should be placed or focused on the centre or, at least,
within the outline of targeted object.
Note When setting the Museum Search Zone, the zone should be placed inside
the border line of the target object. If the selected block is placed on the
border line, then the sensitivity of the Museum Search may decrease.
Sensitivity Highlight the box beside Sensitivity and press . Select from 1
(low sensitivity) to 5 (high sensitivity).
Min. Blocks Highlight the box beside Min. Blocks and press . Set the
number of sensor blocks that must be activated. Setting the Min
Blocks will only be available if Motion Search is selected.