Honeywell HRDVS Reference Manual Download Page 121

Page: 121 / 140

HRDVS Reference Guide

Rev 2.00

105

Document 900.0281

02/07

Select the criteria (date, time, types of events, time lapse clips).

Press

Play

to display the review clips list.

Press

Camera 1

to select each clip you want to archive. A disk icon appears beside

each selected clip, indicating it is selected for archiving. Camera 1 is a toggle button;
press again to deselect clips.

To select all of the clips in the list for archiving, press the

Camera 2

button. This

button is also a toggle button.

After you have selected the clips you want to archive, press

Camera 3

. The message

This will archive all selected clips. OK/Cancel

appears. Press

start the archive process. A progress box showing the percentages of data
transferred.

If you see the message

No archive drive

, check to see if you have set a drive for

archiving (see

Configuring Storage Setup

, page

Press

EXIT

when complete.

You may abort the process by pressing any key.

Note

Archived clips are not removed from the regular drive; they are only copied.

Archiving From a Report

To save video clips from the review list in a report:

Enable the archive feature in the Disk Setup screen (see

Configuring Storage Setup

page

Set the Select Archive Drive field to the appropriate disk (see

Figure 9-2

Run a report (

Main

Setup

➤

Reports

). See

Running a Report

, page

for detailed

information.

On the Review Events lists, highlight the report clips you want to archive, then press
the Camera 1 button to select one clip at a time or the Camera 2 button to select all
the clips. A disk icon appears beside the clips selected for archiving.

Clips selected for archiving

Summary of Contents for HRDVS













































































































































Search results

Summary of Contents for HRDVS

Reviews:

Related manuals for HRDVS

Brands by name

Popular brands

Honeywell HRDVS, Reference Manual

Search results

Summary of Contents for HRDVS

Reviews:

Related manuals for HRDVS

Brands by name

Popular brands