Honeywell HRDVS, Reference Manual

Page: 13 / 140

HRDVS Reference Guide
Rev 2.00 Document 900.0281
02/07
ix
P
WARNING! This equipment has been tested and found to comply with
the limits for Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to
correct the interference at his own expense.
Regulatory Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The Πmark on the product indicates that the system has been tested to and conforms
with the provisions noted within the EN 55024 Class A Electromagnetic Compatibility
Directive.
Warranty and Service
Subject to the terms and conditions listed on the Product Warranty Card, during the
warranty period Honeywell will repair or replace, at its sole option, free of charge, any
defective products returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer
Service for assistance or to request a Return Merchandise Authorization (RMA) number.
For Honeywell Technical Support, call +1.800.796.CCTV.
Be sure to have the model number, serial number, and the nature of the problem outlined
for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped
to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.