Honeywell HRDVS, Reference Manual

Page: 89 / 140

HRDVS Reference Guide
Rev 2.00 73 Document 900.0281
02/07
P
3. When you are satisfied with your changes, select Accept , then press Enter .
Setting Text Events
Use the Text Events screen to configure transaction text events. Text events may come from
cash registers, ATM machines, a door car reader access system, or any other source that
outputs asynchronous EIA-232 data that is line terminated (carriage return or line feed) with
ASCII format data.
Note Before the system can detect a text event, you must first set up the Text
Insertion port (see
Setting Up Text Ports on page 71 ).
To set up text events:
1. Set up the Text Insertion ports to handle text inputs (see Setting Up Text Ports on page
71 ).
2. Map the camera input to the input port on the Camera Setup screen (see Configuring
the Video Inputs on page 20 ).
3. Configure how the HRDVS responds to text events:
Access the Text Event screen as follows: Main Setup
➤
Install
➤
Event Recording
➤
Text Events . Figure 12-3 displays.
Interface Options are:
None . Select this option when the HRDVS unit is connected directly to an ATM text
port.
MPT400/N . If you select this option when your HRDVS system is combined with an
MPT400/N four-port Protocol Translator, the Trigger Text Strings screen will be
disabled. The unit will set itself to detect the specific trigger strings of Port 1/Port
2/Port 3/Port 4 for each of the four Text Event screens.
Note MPT400/N interfacing instructions and diagrams are available at
www.honeywellvideo.com .
Field (cont’d) Description