Rev 2.00
14
Document 900.0281
02/07
Installation
P
Restoring Default Settings
Use the Default Settings screen if you change some of the settings and later need to restore
the original settings.This returns the system to a known starting point.
Note
Restoring the original factory settings does not erase any recorded
video files on the disks. However, the passwords are reset to the
default (1234) and the System Log is erased.
It also causes an auto detect to occur.The autodetect is performed on
all video outputs. Any live connected cameras will be detected and
automatically enabled in the Switcher monitor and Camera Input
screens. Video inputs with no input will be disabled.
To restore default settings:
1.
Access the Default Settings screen as follows:
Main
Setup
➤
Install
➤
Service
➤
Default Settings
displays with a message:
Warning! This will
delete your existing config! PROCEED
?
Figure 3-1
Default Settings Screen
2.
Select
OK
to restore the factory default settings or
Cancel
if you change your mind.
Press
Enter
.
shows the rear panel connections on the HRDVS.
connect the HRDVS to all peripherals.
Summary of Contents for HRDVS
