Rev 3.01
39
Document 900.0399
08/08
6.
Choose a language for the installation and click Next. The Select Program Folder
appears.
Figure 5-4
Select Program Folder
7.
Click Next to use the default program folder, or manually select a folder from the list of
Existing Folders.
8.
Wait a few minutes while the setup completes.
9.
Double-click the RAS icon (see
Figure 5-5
) that should now be on your desktop to
launch the program.
Figure 5-5
RAS Icon
Opening Ports
Note
The default port for remote live view and playback on your DVR is 5445. To
remotely configure a DVR with the default port selected, you must also open
port 5455. If you change the default port number, the port you must open for
remote configuration is your new port number plus 10 (for example,
5455=5445+10).
When you connect one or more DVRs to a network through an IP sharing device, each
device must have a unique RTSP port number for remote access to each unit from outside
the LAN (Local Area Network). Also, the IP sharing device must be configured for port
forwarding so that each port, when accessed on the IP sharing device, will forward to the
appropriate DVR.
Note
This port number is listed next to the PORT menu option in the Network
Setup screen (see
Figure 3-10
). If you plan to access the DVR units only from
within the same LAN, the RTSP port does not have to be changed.
