How to return all 'Access level PIN codes' to factory settings
The Access levels 2, 3 and 4 PIN codes are reset to factory default settings. You will need to be at access level 4 to reset all PIN codes.
Factory default settings:
Access level 2 code: 0 0 0 0 (Customer Mode)
Access level 3 code: 3 3 3 3 (Engineering Mode)
Access level 4 code: 4 4 4 4 (Maintenance Mode)
How to clear all Logs
All the active and historic logs held at the panel can be cleared out. You will need to be at access level 4 to clear logs.
Commissioning instructions
66
4188-949 issue 3_05/10_Nano Comms inst.
How
to
return
a
ll
'Access
level
PIN
c
odes'
to
factory
settings
Select
Maintenance
>
Select
Engineering
Menu
Clear
Logs
Select
16:15 Tue 16/02/10
W A R N I N G
DELETING ALL HISTORIC EVENTS
(Historic Event Logs)
Are you sure you want to proceed?
Yes
No
Yes
Select
System
>
Select
Select
Engineering
Default
>
Select
Select
Codes
Select
Select
16:15 Tue 16/02/10
Warning! - This will reset all user codes
to their factory default settings!!
ARE YOU SURE YOU WISH TO PROCEED?
Yes
No
Menu
Yes
After making changes to this form you will need to back-up the data to
memory. Ensure the write protect link P9 on the MCB is configured in
the ENABLED position to allow back-up of data.
