How to view the 'Loop Status'
The loop status provides information on the current status of the loop, total number of devices found on the loop, wiring status and the address of the last device on the loop.
You will need to be at Access level 2 or above to view loop status.
You can also view the loop status at Access level 4.
How to view the 'Loop Map' and 'Enable / Disable' Devices
The 'Loop map' is a list of devices installed between end-1 and end-2 of the loop wiring. It shows devices in sequential order starting from End-1 of the loop. This is the first check against the
as fitted
wiring drawings,
that confirms the number of devices installed in the protected premises. It is possible to display or print a loop map. The printout is only possible if a printer is connected. In addition to
this it is possible to scroll to a selected device and view the device information. After viewing the device details you can return to the loop map by selection the'Back' option. You will need to be at
Access level 2 or above to view the loop map.
&
The display of Individual 'Sounder disablement' information will be suppressed when the panel enters a fire condition, consequently in this condition the
panel will fail to meet the requirements of EN54-2 clause 9.4.2 a) amendments.
4188-949 issue 3_05/10_Nano Comms inst.
25
Nano panel based system
How
to
v
iew
the
'Loop
Status'
10:15 Mon 15/02/10
Loop status
Current status :
Started
Total devices
:
127
Wiring status
:
Complete
Last device found at address : 127
Back
Select
Loop
>
Select
Select
User
Menu
Status
Select
The total number of devices found on the loop
The current loop status is ‘Started’
Back
The loop wiring status is complete
The device number of the last device found
on the loop circuit
10:15 Mon 15/02/10
Loop status
Current status :
Started
Total devices
:
127
Wiring status
:
Complete
Last device found at address : 127
Back
Select
Loop
>
Select
Select
Engineering
Menu
Status
Select
The total number of devices found on the loop
The current loop status is ‘Started’
Back
The loop wiring status is complete
The device number of the last device found
on the loop circuit
DEVICE
Select
10:15 Mon 15/02/10
Device : [
1]
Label
: Device 1
Type
: O H Sensor Sounder Strobe
Status : [ ENABLED ]
Assigned to Zone 1
Save
Quit
2
Scroll to ‘Status’
‘ENABLED’ (factory default setting)
or ‘DISABLED’ the device
Save
10:15 Mon 15/02/10
Loop Map
1+
Device
1
2
Device
2
3
Device
3
4
Device
4
Select
Quit
9
9
9
9
Menu
Select
Loop
>
Select
Select
User
Devices
Select
at A3 or
A4 only
Disablement
[amber LED]
Sounder
Disablement
[amber LED]
To scroll range
To move to
the next setting
Loop Map
1+
Device 1
|
20
Device 20
Device 21
Device 22
23
Device 23
9
9
9
9
9
The Devices 21 and 22 are indented,
which suggests they are on the spur
circuit off Device 20.
Select a device from the range 1 to 127
A ‘
’ after the device number
indicates the device is
SAFE addressed.
+
