Honeywell DR4500A, Product Manual, Page: 69 / 266

Release L DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual 55
February 2017
3. Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke sequences to select and
establish (configure) pertinent control data best suited for your application.
What’s in this section?
The table below lists the topics that are covered in this section.
Topic See Page
3.1 Overview 55
3.2 Configuration Prompts 56
3.3 How To Get Started 58
3.4 Configuration Tips 59
3.5 Configuration Procedure 60
3.6 Input Set Up Group 62
3.7 Pen Set Up Group 64
3.8 Chart Set Up Group 65
3.9 Totalizer Set Up Group 66
3.10 Control Set Up Group 67
3.11 Tuning Parameters Set Up Group 69
3.12 SP Ramp Set Up Groups 70
3.13 Timer Set Up Group 71
3.14 Alarms Set Up Group 72
3.15 Auxiliary Output Set Up Group 74
3.16 Modbus Communications Set Up Group 75
3.17 Options Set Up Group 76
3.18 Lockout Set Up Group 77
3.19 Configuration Record Sheet 78
Prompts
To assist you in the configuration process, there are prompts that appear in the upper and lower displays.
These prompts let you know what group of configuration data (set up prompts) you are working with and
also the specific parameters (function prompts) associated with each group.
Figure 3-1 shows an overview of the prompt hierarchy.