Honeywell CD3200, User Manual, Page: 47 / 55

User’s Manual ver. 2.0 CD3200 up to110A Honeywell
45 www.honeywell.com/imc
10.3.19 Firing command Bit 1
Operations: Read / Write
Meaning:
It’s a command bit used to switch from analog external command to command via RS485
0 = Command from analog input
1 = Command from RS485 input
10.3.20 On-Off Bit 2
Operations: Read / Write
Meaning:
It’s used to switch ON-OFF the power.
0 = Power disabled
1 = Power enabled
10.3.21 HB RESET Bit 3
Operations: Read / Write
Meaning:
It’s a command bit to reset HB alarm.
This parameter has to be at 0 to have the alarm working properly.
0 = Reset disabled
1 = Reset enabled
10.3.22 Current Limit control Bit 4
Operations: Read / Write
Meaning:
It’s a command bit used to switch from analog C.L. potentiometer to command via RS485.
0 = Command from Current Limit pot.
1 = Command from RS485 input
10.3.23 Configuration
Parameter N.
Note
Password 123 Write
Actual Power 124 Read /write
Feed-Back Selection 125L Read /write
Soft Start 125H Read /write
HB Delay 126L Read /write
HB sensibility % 126H Read /write
Power Set 127 Read /write
Integral 128L Read /write
Prop. 128H Read /write