Honeywell BW GasAlertMicro 5 User Manual Download

Page: 85 / 113

GasAlertMicro 5/PID/IR

MMC/SD Card Troubleshooting

Reformatting the MMC/SD Card

To reformat the MMC/SD card, complete the following:

1. Insert the MMC/SD card into the card reader.

2. From the computer desktop, double-click

My Computer

view the list of drives.

3. Double-click the

Removable Disk

drive to access

LOG-

FILE0.csv

4. Select

LOGFILE0.csv

and delete.

5. Insert the MMC/SD card into the detector.

6. Activate the detector. The startup self-test begins and the fol-

lowing screens display.

7. Press

to format the MMC/SD card. The following screen dis-

plays.

For any additional MMC/SD card errors, refer to

Troubleshooting

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BW GasAlertMicro 5

















































































































Search results

Summary of Contents for BW GasAlertMicro 5

Reviews:

Related manuals for BW GasAlertMicro 5

Brands by name

Popular brands

Honeywell BW GasAlertMicro 5, User Manual

Search results

Summary of Contents for BW GasAlertMicro 5

Reviews:

Related manuals for BW GasAlertMicro 5

Brands by name

Popular brands