21
GasAlertMicro 5/PID/IR
Deactivating the Detector
Deactivating the Detector
To deactivate the detector, press and hold
A
while it beeps and flashes
to the corresponding countdown.
At the end of the countdown, the detector emits an extended beep and
flash then displays
0
before deactivating.
Note
If
A
is not held down for the complete countdown, the detector
remains activated.
User Options Menu
If the detector is passcode protected, a passcode must be entered to
access the user options menu. For more information, refer to
.
The available user options are as follows:
1.
Exit
2.
Options:
Backlight, confidence beep, due-lock, latch, pass-
code, and safe mode.
3.
Sensors:
Sensor enable/disable, span gas, STEL period, TWA
method, resolution, % vol CH
4
, correction factor, automatic O
2
calibration, and % vol CO
2
(CO
2
sensor only)
4.
Logger
5.
Clock
6.
Language:
English, French, German, Spanish, and
Portuguese.
7.
Tech mode:
Sensors, initialize, forced calibration, daily bump
test, stealth, and zero level (CO
2
sensor only).
Note
Tech mode
is not visible in the user options menu. To access
this option, refer to
www.
GlobalTestSupply
.com
Find Quality Products Online at:
