GasAlertMicro 5/PID/IR
User Manual
100
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules and
ICES-003 Canadian EMI requirements. These limits are designed to
provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
General Specifications for Datalogger Units
Media type:
MultiMediaCard (MMC) or Secure Digital (SD) card
Approved MMC and SD cards for GasAlertMicro 5 and GasAlertMi-
cro 5 PID:
Contact
Approved MMC and SD cards for GasAlertMicro 5 IR:
Contact
for more information.
Storage:
500,000 lines of data available; 4.4 months at 5 second
intervals (based on a normal work week)
Memory type:
Wrap-around memory ensures most recent data is
always saved
Sample rate:
One reading every 5 seconds (standard)
Data recorded:
All sensor readings, all alarm conditions, calibrations,
event flags, battery status, pump status, sensor status, confidence beep
activation, and detector status that includes the date, time and detector
serial number for each reading
MMC/SD card test:
Automatically during activation
www.
GlobalTestSupply
.com
Find Quality Products Online at:
