Honeywell ACUIX, User Manual

Page: 95 / 148

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 95
02/08
Note An alarm can be acknowledged before the contact returns to normal;
however, the ACUIX will not respond to the alarm again until the contact has
returned to normal and gone into alarm again.
Set Alarm Condition
Select 2 from the Program Alarms menu to
set the alarm condition.
Select the alarm number to toggle its alarm
condition between OPEN or CLOSE. For
example, selecting 3 toggles the condition
for alarm number 3 OPEN or CLOSE.
Table 7-2 Alarm States
If: Then:
Alarm is disabled The ACUIX ignores a change of state in the alarm input.
Alarm is enabled and not
programmed The ACUIX ignores a change of state in the alarm input.
Alarm is enabled and
programmed The ACUIX performs the action programmed for the
alarm input when a change of state occurs. The ACUIX
adds
AL
and the alarm number to the video signal.
AL
remains on the video until all alarms are acknowledged.
The alarm status displays on-screen on the same line
as the Camera ID display.
More than one alarm
occurs The ACUIX performs the action for the first alarm and
adds the other alarm numbers to the video in numerical
order. When the first alarm is acknowledged, the ACUIX
performs the action for the next alarm with the lowest
number. For example, alarm contacts 2, 4, and 3 go into
alarm in the order stated. The monitor display appears
as AL-234. The ACUIX performs the action programmed
for alarm 2.
AL
continues to be displayed until all alarms
are acknowledged and then is removed from the
display. When alarm 2 is acknowledged, the number 2
is removed from the alarm display and the ACUIX
performs the programmed action for alarm 3. When
alarm 3 is acknowledged, the number 3 is removed
from the alarm display and the ACUIX performs the
programmed action for alarm 4.
SET ALARM CONDITION
ALARM # CONDITION
1 CLOSE
2 CLOSE
3 CLOSE
4 CLOSE
ESC to Exit