Honeywell ACUIX, User Manual

Page: 79 / 148

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 79
02/08
6
ACUIX Password Feature
The ACUIX features password protection for accessing the on-screen setup menus. This
feature can be enabled or disabled. If enabled on the ACUIX, the user must enter a 4-digit
Personal Identification Number (PIN) to access the on-screen setup menus. When
enabled, all users can manually control (pan, tilt, zoom, focus, iris) and automatically
control (Preset, Preset Tour, Mimic Tour) the ACUIX.
The Privacy Zone password that applies when using Diamond or IntelliBus protocol can
be reset to the default password through the password feature menu. This password only
applies if the ACUIX is set for Diamond or IntelliBus protocol. All Privacy Zone
programming can also be deleted through this menu.
Enabling the Password Feature
The password feature is accessed using a Preset command.
1. Ensure you have manual control (pan/tilt) of the ACUIX in which you want to enable
the password feature and the video from the same ACUIX can be viewed on a
monitor.
2. Send the ACUIX to Preset 75.
The password on-screen menu
displays.
a. Move the joystick up and down to
enter the Supervisor’s password
(1000 = Supervisory default).
Move the joystick left and right to
move the cursor between digits.
b. Press Iris Open.
c. Move the joystick up or down to
position the cursor on 1 User Login
PIN.
d. Press Iris Open to change
disabled to enabled.
e. Press Iris Close to exit.
ADMINISTRATOR LOGIN SCREEN
Enter 4-digit PIN ----
Use
↑ ↓
Keys to enter PIN
IRIS CLOSE to Exit
IRIS OPEN to Enter
PASSWORD SETTINGS
1 User Login PIN ... DISABLED
2 Change PIN
3 Reset Privacyzone Password
4 Delete All Privacyzone
IRIS CLOSE to Exit