Honeywell ACUIX, User Manual

Page: 63 / 148

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 63
02/08
Lens Control
The lens iris is automatically controlled by the camera, but can be controlled manually
from the controller.
Iris
Press + (OPEN) or - (CLOSE) on the HJZTP controller to manually alter the camera’s iris.
The camera auto-exposure must be off. Press auto above the iris control keys to put the
camera in auto-iris mode.
The camera lens auto exposure mode can be enabled or disabled using the controller.
Preset 92 toggles the unit between auto and manual exposure. A message
AUTO
EXPOSURE ON
or
AUTO EXPOSURE OFF
displays on the video when the ACUIX executes
Preset 92.
Focus
Press + (FAR) or - (NEAR) on the HJZTP controller to manually focus the camera.
Note Auto focus control can be set through the ACUIX setup menus (see Auto
Focus , page 100 ), to come on when the camera is panned, tilted, or zoomed.
Freeze/Unfreeze Video—Preset 95
The freeze/unfreeze video function described in
Freeze and Unfreeze Video on page 35 can be
accomplished using Preset 95. If the video is frozen,
an asterisk (
*
) appears on the monitor on the same
line as the camera message.
If the camera message is turned off, the asterisk
displays by itself.
* CAM-0001 M
*