Honeywell ACUIX, User Manual

Page: 100 / 148

100
On-Screen Setup Menus
Auto Focus
Select 6 from the Control Options menu to set up the operation of the Lens Auto Focus.
Selecting 6 toggles between the options: OFF, Z (default), and PTZ.
The minimum focus distance is set at 1.0 meter (3.3 ft) from the camera lens in both manual
and automatic focus mode.
Preset Tour Auto Focus
Select 7 to toggle the Preset Tour Auto Focus feature ON or OFF (default).
Change Address, Protocol
This menu display is determined by the
setting of DIP Switch SW5/8. If SW5/8 is set
to ON, the current address and protocol
settings can be viewed, but cannot be
changed.
If SW5/8 is set to OFF, then the address,
baud rate, and protocol can be changed.
Table 7-8 Auto Focus Operation
Value Usage
OFF Turns the Auto Focus feature off. The lens
must be manually focused.
Z The lens auto focuses whenever the zoom
setting is changed. This is the
recommended setting for normal
operation.
PTZ The lens auto focuses whenever the pan,
tilt, or zoom positions are changed.
Table 7-9 Preset Tour Auto Focus Operation
If: Then:
Preset Tour Auto Focus is on The lens auto focuses when going to a
Preset while running a Preset Tour.
Preset Tour Auto Focus is off The lens goes directly to the focus position
stored for each Preset while running the
Preset Tour. It does not auto focus. This is
the recommended setting.
ADDRESS, PROTOCOL CHANGE MENU
Settings Change “DISABLED*
1 Change Camera Address .... 1
2 Change Protocol .... DIAMOND
3 Change Baud Rate ...... 9600
4 Change Parity ......... EVEN
ESC to Exit