Holzworth Instrumentation HA7062C, User Manual, Page: 51 / 108

HA7062D Manual Rev 1.01
www.holzworth.com
Page 49 of 105
9.13 LIMITS
9.13.1 LIMIT LINE SETUP

Limit Lines are created by clicking the Add Limit Point button, and are added one by one to
form a Limit Line.

Save Limits allows the user to save an already created limit line as a Holzworth Limit File (.hlf).

Load Limits allows the user to load a Holzworth Limit File or a .csv file.

Clear All will remove the limit points/line from the plot area.

Limit Point Frequency is user defined and sets the frequency for a given limit point.

Limit Point Value sets the amplitude limit of a given point.

Mode: Change the transition from one limit point to the next to either a Slope or a Step. The 'X'
will remove the applicable limit point.