HA7062D Manual Rev 1.01
www.holzworth.com
Page 22 of 105
1.
File/Tools/System:
The '
File
' menu allows users to save/load data, export plots, and generate
measurement reports to capture all data in the plot area and statistics. '
Tools'
provides access
toa DC Monitor and to a tuner for easy tuning of DUT and/or LO sources. '
System
' allows the
user to save instrument configurations (saving time for commonly used measurement setups),
view/save measurement debug files, and perform firmware updates.
2.
Acquire / +:
The ‘
Acquire
’
button initiates a phase noise measurement. When the
'+'
button is
depressed, selecting
'Acquire'
will overlay new measurements to the measured data already
captured in the plot area.
3.
Devices:
Allows the user to view any HA7062D analyzer directly connected to the PC (USB or
Ethernet) or over a LAN connection. The instrument serial # and IP address or COM port
depending on the communication protocol in use. Click on the device to make a connection.
4.
Measurement:
Users can change settings such as measurement type, offset range, jitter
analysis range, # of correlations,
etc.
5.
Inputs:
Used to verify DUT and LO input frequency/power, calibrate LO's, make adjustments
for internal/external LO's,
etc.
6.
Outputs:
Provides access to user controlled outputs including the DUT Power Supply, DUT
Tune Voltage, External LO Tune setting,
etc.
7.
Trace/Calcs:
Users can apply smoothing and spur removal functions to a data trace.
8.
Limits:
Apply test limit lines to enable pass/fail conditions to acquired data.
9.
Markers:
Allows users to adjust the positioning of data markers on a trace.
10.
Display:
Allows the user to modify the plot area. Users can edit the x/y axis max/min, plot title,
x/y axis titles, trace names, plot export options,
etc.
11.
Console:
The Console displays a log of instrument/measurement activity while also allowing
the user to send ASCII commands directly to the instrument.
12.
Data Plot Area:
Displays acquired data: PM, AM, baseband, spurious,
etc
.
13.
Status Indicator:
The Holzworth shockwave logo doubles as a status bar/indicator while
measurements are in progress. Approximate measurement time remaining is also shown above
the shockwave.
14.
Measurement Statistics:
Displays statistics of the current measurement or currently selected
trace.