HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 38
Formátovací pila / panel saw TS 250F-1600
13.2.8
Install the cross-cut fence
•
Drop the cross cut fence into the forward or
rear guide pin hole.
•
Tighten the knurled nut.
•
Turn the star type screw and clamped the fence
in position.
•
Slide the flip stop (A) into the fence.
•
Place a T-nut into the top slot of fence, thread
the stud of hold-down on fence.
13.2.9
Screw the suction hose adapter
•
Screw the suction adapter with 4 screws M6x12 and
washers
13.2.10
Screw blade guard cover
•
Screw the blade guard cover on the riving knife
Fig. 17
Fig. 18
Fig. 19
Summary of Contents for TS 250F-1600
Page 62: ......
