HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 33
Formátovací pila / panel saw TS 250F-1600
13
ASSEMBLY
13.1
Preparatory activities
13.1.1
Scope of delivery
After receipt of the delivery, if all parts are in order. Report any damage or missing items immediately
to your dealer or the shipping company. Visible damage must also be recorded without delay in ac-
cordance with the provisions of the warranty on the delivery, otherwise the goods shall be accepted
as properly.
13.1.2
Workplace
Choose a suitable place for the machine. Observe the safety requirements of Chapter
12
and the di-
mensions of the machine from Chapter
11.3
.
The selected location must ensure as well as the possibility for connection to an extraction system a
suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on all
bases simultaneously.
You must also secure around a distance of at least
0.8
m around the machine. Before and behind the
machine must be provided the necessary distance for the supply of long workpieces.
13.1.3
Preparation of the surface
Eliminate the preservative, which is applied for corrosion protection of the parts without painting. This
can be done with the usual solvents. Here no nitro solvent or similar means, and in no case use wa-
ter.
N O T E
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
Therefore:
ρ
When cleaning, use only mild detergent
Summary of Contents for TS 250F-1600
Page 62: ......