HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 45
Formátovací pila / panel saw TS 250F-1600
•
Safety cover back on.
•
Saw blade protection cover back on.
Installation is in the reverse order of removal.
NOTE
: Observe direction of rotation of the saw blade during installation!
15.2
Change V-belt
Disconnect the machine from the power supply prior to any checks performed
at the machine itself !
•
Set the saw blade to tilt
90°
.
•
Remove saw blade - see
8.1
•
3 Allen screws
M8x18
Unscrew the cover plate.
NOTE:
To remove the lower two Allen screws that tilt the blade to
30°
is set. For the upper
hex screws tend to
90
.degree.
•
Unscrew the left side panel plate.
•
Motor screws (
A
), loosen the extent that the belt tension to the extent laid remove the belt
around it (
B
).
•
Remove the V-belt and replace with new.
In reverse order tension V-belt, motor tighten,
then tighten the V-belt cover and mount the saw
blade.
B
A
Fig. 22
Fig. 23
Summary of Contents for TS 250F-1600
Page 62: ......
