HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 36
Formátovací pila / panel saw TS 250F-1600
f)
Align
assembly rip fence rail / measuring scale
•
Adjust the tilt angle of the saw blade to 90 °.
•
Slide the rip fence to the rip fence rail.
•
The rip fence to the saw blade slide.
•
Tap on the right end of the scale to the "
0
" scale on the
rail with the red line on the Lens align the rip fence.
g)
Cultivation of the rocker arm
•
Place the rocker arm on the base unit and fasten with
4 screws M8x30
13.2.4
Sliding table mount and align
•
Insert the angle brackets with the mounted
6
-hexagon
screws heads (
B
) in the T-slot (
A
) of the basic profile.
•
Slightly tighten the angle brackets with washers and
6
-hexagonal screws.
•
Adjust the gap at the left end of the sliding table to the
base frame of
400mm
. (
Fig. 12
)
•
Set the distance from the sliding table to the main table
to
2-3 mm
parallel to the saw blade.
•
With the adjustment screws (
E
) set horizontally on both
sides and tighten lock nut. (
Fig. 13
)
•
Tighten the
M10
nuts (
D
). (
Fig. 13)
Fig. 10
Fig. 9
Fig. 11
Fig. 12
Summary of Contents for TS 250F-1600
Page 62: ......
