HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 35
Formátovací pila / panel saw TS 250F-1600
d)
rear worktable screw (Fig. 6)
•
With 2 screws M8x12 and washers rear worktop is bolted to the
main work
13.2.2
Install guide rail and rip fence
•
Install guide rail and rip fence
•
Set 3 pcs 4-kant M8x25 screws from the outside into the worktop. (Fig. 7)
•
Inside turn to screw on the screws washers and 6-hexagon nuts.
•
Slide the guide rail as shown on Fig.7 with the profile on the screws.
•
The 6-hexagon nuts tighten slightly.
•
The guide rail ausjustieren and tighten securely.
13.2.3
Mounted handwheel height adjustment /
tilt angle
The hand wheel for height adjustment (1) and for the Incli-
nation angle (2) Place the blade onto the shaft and tighten
with the appropriate screws on the spindle shaft
4-hexagon screw
1
2
Guide rail rip fence
Fig. 6
Fig. 7
Fig. 8
Summary of Contents for TS 250F-1600
Page 62: ......
