39
FireNET FN-DAC Digital Alarm Communicator I & O Manual - v 1.0
4.1.2 Connecting to the FN-DAC
You may connect to the FN-DAC in one of the following ways –
4.1.2.1 Connection Method 1
1) For the first-time connection to a site, create a new project in Loop Explorer.
2) Click on the Dial icon on the Toolbar. You will see the following –
3) Enter the number of the phone line that is connected to the phone line 1
terminals on the FN-DAC dialer. Note that only phone line 1 on the FN-DAC is
configured to answer an incoming call and establish the remote access
connection. When the correct number has been entered click on the Dial
button.
4) If your modem speaker is on, you will hear the modem dial the phone number
you entered. After the FN-DAC answers and verifies the call, you will be
presented with the Password box just as you would with a direct connection.
firealarmresources.com
