11
FireNET FN-DAC Digital Alarm Communicator I & O Manual - v 1.0
Section 2 – Installation
The FireNET FN-DAC is designed to be installed in the control panel enclosure with
the FireNET 4127 panel. The FN-DAC may also be installed in the FN-LCD-N Network
Annunciator. Operating power is provided by the FireNET auxiliary power.
2.1 Parts List
The FireNET FN-DAC communicator includes the following components:
FN-DAC Circuit Board
Ribbon Cable
Ribbon Cable Mounting Clips (4)
10 mm Standoffs (4) – for use when installing the FN-DAC in the FN-LCD-N
Network Annunciator
2.2 Installing the FN-DAC in the FireNET Panel
The FN-DAC communicator must be installed in the auxiliary module mounting location
in the FireNET enclosure. Note that the circuit board must be installed with the
telephone line connections toward the top of the FireNET enclosure.
WARNING!
DO NOT PLUG OR UNPLUG RIBBON CABLES
WHILE BOARD IS POWERED. STATIC
SENSITIVE CIRCUITS. OBSERVE STATIC
HANDLING PROCEDURES AT ALL TIMES
Figure 2.2.1 – Auxiliary Module Mounting Location
firealarmresources.com
