35
FireNET FN-DAC Digital Alarm Communicator I & O Manual - v 1.0
Test Code Time
– This is the time that the test report will be transmitted to the
monitoring station. The test report is sent every 24 hours at the time programmed.
Report By Point / Zone
– Check the box to configure the FN-DAC to report events
using the address of each analog device. Uncheck the box to report by zone. Please
see Appendix C for more details on zone and address reporting.
Account 1 – 4 tabs
– Select the account you wish to program.
Account Number
– Enter the account number for this location. Valid characters are
0 – 9, B - F.
NOTE:
For correct communicator operation, always enter at least
4 digits
. If you are
using a 3 digit account number, be sure to enter a leading 0 (account #
123
should be
entered as
0123
).
NOTE
: While Loop Explorer will allow you to enter up to six digits for the account
number, only the first four digits will be reported when using Contact ID format.
firealarmresources.com
