HoB HOBLink, Administration Manual

Page: 80 / 83

Configuring XML Parameters for HOBLink VPN Gateway HOBLink VPN Gateway
80 Security Solutions by HOB
6.10 Configuration Parameters for L2TP
( l2tp )
The parameters that can be set under L2TP are as follows:
IPsec Scheme
ipsec-scheme
This is only valid for action IPSEC.
This is the name of the IPsec
scheme. The schemes should be
specified previously in the list of
IPsec schemes (ipsec\ipsec-
scheme-list\ipsec-scheme-
entry\name), because they are
used in this field
Audit
audit-type
This is the type of log. The
supported options are none
(NONE), all (ALL), errors
(ERRORS). The value bye default
is NONE
Queueing Priority
(1...5)
priority
This is to set the priority of packets
in the tunnel. It can be beneficial to
define the priority to assure a level
of QoS (Quality of Service) for
some services if there are several
types of packets in a network. The
value should be in the range from
1 (highest) to 5 (lowest). The
default priority is 1
Parameters XML Name Description
Local virtual IP-
Address
virtual-ineta-
local
This is the IP address of the local
L2TP endpoint
Receive window size
receive-window-
size
The value should be in the range 1
– 65535, and 4 is the value by
default
Keepalive interval
keepalive-
interval
This is the keepalive time interval
in seconds. The value should be in
the range 1-65535, and 60 is the
value by default
Keepalive logging
keepalive-
logging
This is used to enable the
keepalive logging (YES/NO). The
value by default is 'NO'
IPsec scheme
ipsec-scheme
This is the IPsec scheme. The
schemes should be specified
previously in the list of IPsec
schemes (ipsec\ipsec-scheme-
list\ipsec-scheme-entry\name),
because they are used in this field