HoB HOBLink, Administration Manual

Page: 49 / 83

HOBLink VPN Gateway Configuring HOBLink VPN Gateway
Security Solutions by HOB 49
DPD timeout – the DPD wait timeout in seconds. The value should be in the range
of
1-600
, the default is
10
.
DPD retries – the number of DPD retries permitted. The value should be in the
range of
0-20
, the default is
2
.
IKE SA lifetime (seconds) – enter the desired lifetime for the IKE security
association (SA). The range is between
300-1209600
seconds, the default is
604800
.
5.9 Internet Protocol Security (IPsec)
HOBLink VPN Gateway uses the IPsec security protocol to encrypt the
communications between the peers in the network. How this is done can be
configured in the following sections. This following screen shows the IPsec scheme
that is defined by default for all new connections.
Figure 30: IPsec
The entry field for the Internet Protocol Security (IPsec) interface is as follows:
Default IPsec scheme – select from the drop down box the IPsec scheme to be
defined as the default scheme for all new connections. The default is
No default
IPsec scheme
.